Short answer
The operator lists LA1 at 600 W 7th Street, Floors 6–7, Los Angeles, CA 90017. Its marker is an address-level reference point—not a surveyed building outline, loading dock, or property boundary.
At a glance
- Operator
- Equinix
- Facility code
- LA1
- Address
- 600 W 7th Street, Floors 6–7, Los Angeles, CA 90017
- Metro
- Los Angeles
- Operator-listed colocation space
- 60,719 ft²
- Published resiliency configuration
- operator-listed colocation space across floors 6 and 7
- Map precision
- Address-level; approximate coordinate displayed
- Status
- Operator-listed facility
What the sources establish
- Equinix lists the facility and its street address. [1]
- The operator’s current page lists 60,719 ft² of colocation space. [1]
- The same page describes operator-listed colocation space across floors 6 and 7. [1]
Why this location has its own dossier
This is a distinct local query for downtown Los Angeles address, published occupied floors, and operator-stated space. The page uses the named facility code, rather than collapsing a specific site into a generic New York or Northern Virginia results page.
What this page does not establish
- Current use of the published space, current MW load, customer names, or lease terms.
- Water source or use, generator inventory, emissions, or measured noise.
- City permits, tax arrangements, utility contracts, or future expansion approvals.
Documented project snapshot
This is a facility or project record, separated from nearby pins because it has its own recorded operator, place, and status context.
- Recorded stage
- Operator-listed facility
- Published capacity context
- No project-specific MW figure is stated in this dossier.
- Source trail
- The source panel links the records used for this dossier.
Verification priority: Review the operator’s latest technical material and local expansion, air-permit, utility, water, and building records before treating this page as a complete current operating profile.
Any capacity figure is a dated source note, not proof of current electrical draw, water use, tenant identity, emissions, employment, tax outcome, or parcel boundary.
What to check next
- Equinix’s current facility page for availability and services.
- Municipal and county planning, building, and fire records for local conditions.
- Utility filings and public-meeting records before making environmental or infrastructure claims.
Frequently asked questions
Where is Equinix LA1?
Equinix lists LA1 at 600 W 7th Street, Floors 6–7, Los Angeles, CA 90017.
Is the map pin a verified parcel boundary?
No. It is an approximate address-level reference point.
Local records and verification checklist
This dossier distinguishes what its cited source establishes from records that must be checked locally. A facility name or map pin alone does not establish its current power demand, water use, permits, tenants, construction status, or property boundary.
- Map location
- Use the precision label on this page. Address-level pins are approximate reference points, not surveyed entrances or parcel outlines.
- Planning and zoning
- Check the relevant city or county planning portal for case numbers, zoning, hearings, site plans, conditions, and staff reports.
- Building and fire permits
- Check local building and fire records for permit numbers, building scope, generator systems, inspections, and occupancy records.
- Power and water
- Check utility filings, interconnection records, water/wastewater permits, and public-agency meeting materials before making resource-use claims.
- Air, noise, and stormwater
- Check air-quality permits, generator-test conditions, noise studies, stormwater documents, setbacks, landscaping, and screening requirements where available.
- Public benefits and timeline
- Check development agreements, tax records, incentive documents, hearing minutes, and dated project announcements for commitments and milestones.
Information boundaries
Unless a linked primary source says otherwise, this page does not identify customers, tenant names, real-time capacity use, exact utility consumption, generator emissions, taxes paid, jobs created, or future expansion. Those claims need a specific public or operator source.
Facility record at a glance
- Facility name
- Equinix LA1
- Operator / developer as recorded
- Equinix
- Location context
- Los Angeles (Los Angeles County), CA
- Record status
- Operator-listed facility
- Pin precision
- address-level reference
- Verification label
- checked
- Source record
- Source-linked dossier; see this page’s source section
- Database reviewed
- 2026-11-09
The status and capacity fields are dated source notes, not real-time operating data. Read the linked sources and local records before relying on them for a current decision.
Community action and public process
Recorded project status: Operator-listed facility
This dossier does not yet contain a verified project-specific community-action record. That is not evidence that no community activity exists.
This guide does not assume that residents oppose a facility. It records public process and documented local activity when a source supports it.
How to check or participate locally
- Search the city or county planning portal for the facility address, operator, and project name.
- Look for zoning cases, permit numbers, staff reports, agendas, hearing recordings, and public-comment deadlines.
- Check utility, water, air-quality, stormwater, and transportation agencies for project-specific filings.
- Use official meeting instructions to submit comments or request public records.